amp question

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57217
Printed Date: May 14, 2025 at 2:15 AM

Topic: amp question

Posted By: Redstorm3
Subject: amp question
Date Posted: June 07, 2005 at 8:34 AM

I just want to double check my wiring:

If i have 2 12" DVC 4 ohm (Infinity 1242w) and i wire them in series then parallel which would give me a 4 ohm load on my Kenwood KAC-7201 which at 4 ohms bridged gives me 430 watts does this sound right? and would these subs handle that ?

Replies:

Posted By: DYohn
Date Posted: June 07, 2005 at 10:17 AM

Your wiring sounds right to me. The subs handle 300 watts each (thermally.) What kind of enclosure are you using? A ported enclosure might drop their power handling down to about 240 watts (each.)

-------------
Support the12volt.com

Posted By: Redstorm3
Date Posted: June 07, 2005 at 10:19 AM

I have a sealed q-logic box

Print Page | Close Window