box size

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57299
Printed Date: May 09, 2025 at 9:07 AM

Topic: box size

Posted By: repomansaints
Subject: box size
Date Posted: June 08, 2005 at 2:21 PM

i have 2 PWR-812 woofers and a punch 200.2 amp, what kind of box should i make and what size/dimensions should i use, i am putting this in a 94 suburban with third row bench,,

Thanks,

RMS

Replies:

Posted By: DYohn
Date Posted: June 08, 2005 at 3:38 PM

What are the T/S parameters on the woofer? What does Rockford recomend?

-------------
Support the12volt.com

Posted By: repomansaints
Date Posted: June 08, 2005 at 7:15 PM

i was wondering if you guys knew,, and also whats the best board to use

Posted By: spootydlux4
Date Posted: June 08, 2005 at 7:34 PM

3/4" mdf is the best wood to use. have you checked rockfords website?

-------------
blah blah blah blah

Print Page | Close Window