distribution block needed for capacitor?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57308
Printed Date: April 26, 2024 at 9:10 PM

Topic: distribution block needed for capacitor?

Posted By: dannyboi
Subject: distribution block needed for capacitor?
Date Posted: June 08, 2005 at 4:13 PM

I was wondering if a distribution block was needed for the install of a capacitor?

-------------
"the greatest skill of a person is a skill unknown"

Replies:

Posted By: hightek
Date Posted: June 08, 2005 at 4:50 PM

i've never installed a cap before but i don't think you need a distro block. you wire the ground and to the battery. then the amp is wired to the cap. i'd do more research, since i've never actually done it before

-------------
hightek
alpine cda-9827
12" Brahma
Eclipse DA6213

and still working on it

Posted By: jussam
Date Posted: June 08, 2005 at 6:15 PM

well if you want to have a clean look with your wires check this out. it go directly on to your cap there are many ways to achieve a clean finish look or just more ouputs if that is what you want

honestly you don't really need it

-------------
2-alpine amp mrv-f545 4ch amp
polk audio 6 1/2 frontdoor w/alpine center speaker
polk audio 6 1/2 rear w/8"polk sub
2-12" alpine X type sub
2-alpine mdr-1005 amps

Print Page | Close Window