Mach 460 Question
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57501
Printed Date: May 18, 2025 at 10:52 AM
Topic: Mach 460 Question
Posted By: Memphisman
Subject: Mach 460 Question
Date Posted: June 11, 2005 at 7:00 PM
Does anybody know if there is a harness to connect a JVC headunit to a Mach460 system in a 2001 Ford Mustang (the factory unit is an in-dash 6-disc changer)?
Replies:
Posted By: bazzgazm
Date Posted: June 11, 2005 at 8:05 PM
Should work with the basic ford harness. the only problem you have is the mach 460 uses a 6v turn on, as opposed to the 12v turn on your deck supplies, what this will do is cause the so called "turn on pop" to fix this. the trick is to put a 1kohm resistor in line with your turn on wire in the factory harness/ aftermarket harness. this will (according to ohms law) Create a 6v turn on. as per your harness. just go buy one at your local audio shop. or if you're smart. Just go when they're doing free labor and let them deal with it =) Saves you the trouble. have fun
Posted By: bazzgazm
Date Posted: June 11, 2005 at 8:06 PM
Should work with the basic ford harness. the only problem you have is the mach 460 uses a 6v turn on, as opposed to the 12v turn on your deck supplies, what this will do is cause the so called "turn on pop" to fix this. the trick is to put a 1kohm resistor in line with your turn on wire in the factory harness/ aftermarket harness. this will (according to ohms law) Create a 6v turn on. as per your harness. just go buy one at your local audio shop. or if you're smart. Just go when they're doing free labor and let them deal with it =) Saves you the trouble. have fun
|