ported box size?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57544
Printed Date: May 09, 2024 at 9:57 PM

Topic: ported box size?

Posted By: bassrider20hz
Subject: ported box size?
Date Posted: June 12, 2005 at 1:56 PM

hello peolpez i have a noob question. how small can a box be to be ported?

do you think that 1.2 cubic ft is enough to go ported. because i have a 1 cubic ft box sealed and wanted to go ported but they told me that the box was too small to go ported.

thanks in advance for your advice.

Replies:

Posted By: dwarren
Date Posted: June 12, 2005 at 2:03 PM

It's not a matter of that, it's whether or not it is to the mfg. specs. My guess is no. You need to get the specs other wise you will have terrible results.

What subs?

-------------

Posted By: stevdart
Date Posted: June 12, 2005 at 2:44 PM

I've built boxes that are ported and are less than 0.1 cubic feet. So as dwarren said, it depends on the speaker you're talking about.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Posted By: oonikfraleyoo
Date Posted: June 12, 2005 at 2:45 PM

You can't just take a sealed box and throw in ports if thats what your asking. Well, not for the most part.

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.

Posted By: bassrider20hz
Date Posted: June 13, 2005 at 1:22 PM

thanks everyone for your replies i just bought a box thats 0.7 cubic ft just perfect because the speces for my woofer recomend a sealed minimum 0.4 and maximum 0.9 cubic ft box . this new box gives me what i want

the subs that i am using are these.https://www.absoluteusa.com/cat-list.php?id=55&subdesc=VIAGRA%20SERIES the VI1000

has anyone heard of this brand?? i think they are bootleg. but hey they pound harder then sonys.

Print Page | Close Window