'90 300zx amped sub install
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57675
Printed Date: May 14, 2025 at 1:19 AM
Topic: '90 300zx amped sub install
Posted By: mxxmikexx
Subject: '90 300zx amped sub install
Date Posted: June 14, 2005 at 12:05 PM
Just looking for some input here. going to be installing an infinity basslink (10" amplified sub) into a 1990 nissan 300zx that has the bose system in it. The basslink accepts either hi or lo level input, i know how much of a pain it is to take apart the rear of the hatch in the 300 to grab the hi-level. so i was just wondering if it might be feasable to grab rear lo-level output from behind the radio on the 300zx? just trying to save a little time/labor on the job here.
-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106
Replies:
Posted By: tcss
Date Posted: June 14, 2005 at 1:35 PM
Head unit falls just about exactly between lo and hi level. I use a PIE PDC-LOC and grab the signal from the back of the radio.
|