2 ch amp dvc sub
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57719
Printed Date: May 04, 2024 at 11:08 AM
Topic: 2 ch amp dvc sub
Posted By: shkeel
Subject: 2 ch amp dvc sub
Date Posted: June 14, 2005 at 11:47 PM
Is it bad for the sub if u take a 2 channel amp and run one channel to one voice coil and the other channel to the other voice coil? Do they both have to be mono?
-------------
94 Camaro Z28
Jensen 7" Indash-DVD/mp3/tv
Rockford ChromeSeries 600/2
Power Accoustic 12" Dvc700rms
Rockford Power T162C
JLaudio 6.5" 75rms
PS2 Slim hardwired
Lightning Audio 1 Farad Cap
Replies:
Posted By: ss-installer
Date Posted: June 15, 2005 at 12:12 AM
its ok to do that but the amp will feed the sub wierd as far as running stereo to one sub. ive done it before with no problems. keep the balance centered up.
-------------
Posted By: haemphyst
Date Posted: June 15, 2005 at 12:27 AM
Or, if you are that worried about it, wire the voice coils in series, and bridge the amp. The net impedance is the same, and you don't have to worry about it...
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
|