pyle
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57952
Printed Date: May 01, 2024 at 4:52 PM
Topic: pyle
Posted By: rock1
Subject: pyle
Date Posted: June 18, 2005 at 12:22 AM
Im getting no power from my pyle plcd46 cd player.
I got it setup with a harness that connects to the car.
The car is a 92 mazda 929.
I got left over wires from the cd player that does not even connect to the harness. I need help setting this up.
Replies:
Posted By: shiftmx11
Date Posted: June 18, 2005 at 3:18 AM
what colors if its blue or blue white dont worry about if it is your black wire then just sreaw the HU in to the dash becuase the metal brackes that hold the radio in the dash acts as your ground. if that dont work then its your PYLE raido PS stay away from pyle next time
Posted By: shiftmx11
Date Posted: June 18, 2005 at 3:21 AM
hold on i might be wrong sorry, thinking of a diffent car it might be the same tho
Posted By: Chad7n7
Date Posted: June 18, 2005 at 9:59 AM
If you have used an aftermarket harness, and have made all of your connections properly, then try checking your fuses. If they are all good, then take a DMM, and check your wires at the HU to single out your problem, using the ground wire from the HU, if you have constant +12V ( yellow ) and switched +12V ( red ). then your unit is probably no good.
-------------
Posted By: rock1
Date Posted: June 18, 2005 at 10:48 AM
I connected the harness but I got some wires from the cd player that goes not connect to the harness. I got the backlighting wire and some other wire where does that go. the main power connects to the harness and the black goes to ground.
Posted By: haemphyst
Date Posted: June 18, 2005 at 10:52 AM
hehe he said "pyle"..
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: rock1
Date Posted: June 18, 2005 at 10:53 AM
whats wrong with pyle?
Posted By: haemphyst
Date Posted: June 18, 2005 at 11:07 AM
Did I say there was anything WRONG with Pyle? Sounds like a persecution complex. Do you know of something wrong with Pyle that I'm not aware of? Calm down, man  Just making a joke... (Pyle sounds like pile - as in pile of shhh - just a joke. Ya know Beavis and butthead, from MTV?) Gawd, I hate having to explain a punchline  ------------- It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: DYohn
Date Posted: June 18, 2005 at 11:22 AM
haemphyst wrote:
Gawd, I hate having to explain a punchline
Especially when it's appropriate! ------------- Support the12volt.com
Posted By: rock1
Date Posted: June 18, 2005 at 11:24 AM
Im just asking. I dont like there customer service. its not like other brand names.
Posted By: DYohn
Date Posted: June 18, 2005 at 11:50 AM
Pyle is a very low-end brand, one I like to call "flea-market" quality. Thier sound quality is extremely poor, they have unacceptably high distortion and noise, and they are prone to early failure. Plus they are one of the many brands who inflate their ratings, with "500 watt" amplifiers being actually able to produce more like 20 watts without clipping or distortion. Hey, if it works for you, great. But for a bit more money there are far, far better choices. ------------- Support the12volt.com
Posted By: uthinkuknoaudio
Date Posted: June 18, 2005 at 9:15 PM
hehe, pyle, someone dig up that old post on pyle audio experiences lol.
-------------
"I don't play games. I play Nakamichi and that for real yo" - Probably some japanese kid said this in the early 80's trying to sell stereo out of his trunk lol.
Posted By: rock1
Date Posted: August 01, 2005 at 6:01 PM
why dont I get any power from the cd player?
Im using the harness and connected the wires to the wires on the harness.
Posted By: mobile1
Date Posted: August 01, 2005 at 9:38 PM
have you checked your fuses? have you checked with a DMM to see if there is power going to the PYLE unit? (i said pyle and unit just for you haemphyst) make sure you check ALL fuses, sometimes the radio is tied in with other things like dome lights and horns, and if they are all good, and you test the wires with a DMM and all both power wires read voltage when they should and your ground is ok,,,,,, then pyle really lives up to their name. time for a new radio
Posted By: haemphyst
Date Posted: August 01, 2005 at 11:57 PM
mobile1 wrote:
have you checked your fuses? have you checked with a DMM to see if there is power going to the PYLE unit? (i said pyle and unit just for you haemphyst)
make sure you check ALL fuses, sometimes the radio is tied in with other things like dome lights and horns, and if they are all good, and you test the wires with a DMM and all both power wires read voltage when they should and your ground is ok,,,,,, then pyle really lives up to their name. time for a new radio
hehe... He said "unit"... ------------- It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
|