Print Page | Close Window

amp refinishing

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58037
Printed Date: March 29, 2024 at 1:37 AM


Topic: amp refinishing

Posted By: zachzchw
Subject: amp refinishing
Date Posted: June 19, 2005 at 5:48 PM

Id like to improve the appearance of an amp I have. The finish is (I believe) anodized aluminum. (Its a mcintosh mc427, if anyone knows for sure.)
I was wondering if anyone knew of a good product to use to clean it up some, as there are scratches and such on the amp.



Replies:

Posted By: jussam
Date Posted: June 20, 2005 at 2:35 PM
www.duplicolor.com has a cleaner and all type of spray effect that you can use to color your amp and anything else that you would like to refinish

-------------
2-alpine amp mrv-f545 4ch amp
polk audio 6 1/2 frontdoor w/alpine center speaker
polk audio 6 1/2 rear w/8"polk sub
2-12" alpine X type sub
2-alpine mdr-1005 amps




Posted By: DYohn
Date Posted: June 20, 2005 at 4:08 PM
If you have a scratch in anodized aluminum that goes through the anodization to the metal underneath there is nothing you can do except paint it.

-------------
Support the12volt.com





Print Page | Close Window