Print Page | Close Window

Stinger Cap

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58321
Printed Date: May 02, 2024 at 8:16 AM


Topic: Stinger Cap

Posted By: Lizardking
Subject: Stinger Cap
Date Posted: June 24, 2005 at 6:44 PM

Does anyone know what the voltage adjustment on the hybrid caps is for? Doesn't say anything in the manual.

-------------
Eclipse "Approaching Perfection"



Replies:

Posted By: haemphyst
Date Posted: June 25, 2005 at 9:43 AM
Is there a display? If so, I bet it is for calibrating the display to tell you EXACTLY the voltage you are running, or to match the readout on multiple caps, if you went so far as to waste money on MORE than one cap...

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."




Posted By: Lizardking
Date Posted: June 25, 2005 at 9:55 AM

Yes, there is a display, this is the first cap I have seen with a voltage adjustment....I can adjust the voltage from 12.13 volts to 14.14 volts...I wasn't sure if it was for adjusting the voltage for when the cap would be needed....



-------------
Eclipse "Approaching Perfection"





Print Page | Close Window