Kenwood Code on a CD Deck

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58552
Printed Date: May 15, 2025 at 2:59 PM

Topic: Kenwood Code on a CD Deck

Posted By: newinstaller
Subject: Kenwood Code on a CD Deck
Date Posted: June 29, 2005 at 7:31 AM

Hi,

We installed a Kenwood deck into a customers car and it is acking for a code. It is a new deck with a motorized face. It is mp3 player as well. Anyone know how to delete or earase the code? This would make my customer so happy.

Thanks

Replies:

Posted By: DYohn
Date Posted: June 29, 2005 at 8:32 AM

The owner's install manual describes how to set the security code on initial installation. If it's been installed before and you do not have the code, you'll have to pay an authorized dealer to reset the deck for you. Tell your customer they should be happy their gear requires a security code as it helps prevent theft.

-------------
Support the12volt.com

Print Page | Close Window