amp installation
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58867
Printed Date: April 19, 2024 at 9:24 AM
Topic: amp installation
Posted By: Jmeese
Subject: amp installation
Date Posted: July 05, 2005 at 11:35 AM
Ok just got my amp today and have a couple questions after reading the instruction manual. Amp is us acustics usx 2050 2 channel 50 watt rms. Will be adding this to Alpine component set. The amp has 3 settings, amp, hi pass, low pass. It also had adjustments for level, high pass and low pass. Since I will be running with a component set that has its own cross overs will I set the setting to amp and only adjust the level and not worry about the high pass and low pass settings?
Replies:
Posted By: Optik
Date Posted: July 05, 2005 at 11:42 AM
Seems like a good idea to me. set the gain correctly and dont worry about the lpf and hpf
Posted By: Jmeese
Date Posted: July 05, 2005 at 11:44 AM
How do I determine what the proper gain level is?
Posted By: nathan_454
Date Posted: July 05, 2005 at 11:50 AM
https://www.bcae1.com/
number 63 on the sidebar is how to set gains.
------------- MY System, Pioneer Owns...Thanx Gabe
HU: DEH-P770MP
Fronts: TS-C160R
Rears :TS-A6995
Subs: 2x TS-W106C
Sub Amp: GM-7150M
4 CH: GM-6150F
|