Hi,
I bought a Honda cd changer from ebay for my girlfriend's'97 Civic. I won't be able to test it for a couple ofdays, so I thought I'd test it in my '92 Integra first, because the back of my stock deck had the 8-pin input. I'm not sure if the tape deck has cd functions or not,but it has the input, and the bottom of the deck saysit's for an equalizer, a changer, or the little plug.For some reason, it won't fit in my deck. I figured all the 8-pin round cords were the same. Here's some pics below:
Here's the back of the stock deck:
Here's the cord from the changer:
Here's the extra cord that came with it:
Shouldn't this fit my teg?
Thanks!
Replies:
Posted By: matrix
Date Posted: November 25, 2002 at 7:37 PM
If the front of the head unit does not cd or something like that tthen it will not work. It must have a button to switch to changer mode. Most likely in your car that is for an iso-mount. Radio only on top and just cd on bottom, not changer
-------------
matrixman
Posted By: cpgoose
Date Posted: November 27, 2002 at 9:06 AM
thanks matrix.
would you happen to know if when you mount this changer vertically or horizontally, if you have to change something on the side of the changer? I have a Sony changer, and depending on how you mount it, you have to turn the 2 large screws on both sides of the changer to match. The side of the Honda changer says LRH and LLH on the sides, but I don't see anything that "turns".
Just curious. Thanks!