rca question

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59074
Printed Date: May 15, 2025 at 6:25 AM

Topic: rca question

Posted By: harmlessv8
Subject: rca question
Date Posted: July 08, 2005 at 1:54 PM

the hu is a alpine #cda 7850 it has 2 rca preouts front/rear running the rca's to a sony xplod amp#xm-404-eqx what i like to do is run my new amp R/F #p3001 for my subs now for the dum question how do i hook it up with no more rca outputs ? what are some thing's i can do to get it to work

thank's harmlessv8

Replies:

Posted By: dwarren
Date Posted: July 08, 2005 at 2:38 PM

get some rca splitters. you will lose the ability to fade though.

-------------

Posted By: harmlessv8
Date Posted: July 08, 2005 at 6:37 PM

come on that can't be all that i can do

Posted By: dwarren
Date Posted: July 08, 2005 at 6:41 PM

your sony might have the ability to accept one set of inputs and still utilize the third and fourth channels, but if not just use splitters from the first channel on the four channel then the second out from the deck, dedicated to the sub amp.

-------------

Posted By: the96ex
Date Posted: July 08, 2005 at 6:56 PM

Does your sony amp have the ability to pass the RCAs through (like is there another set on the amp that say OUT), my sony XM1002HX does that.

-------------
96 Accord EX Coupe 5-Speed

Posted By: harmlessv8
Date Posted: July 08, 2005 at 8:57 PM

my rockford fosgate #p3001 has pass output's ?

Posted By: harmlessv8
Date Posted: July 11, 2005 at 7:24 PM

so what can i do what would be the best way

thanks harmlessv8

Posted By: SoundAudio
Date Posted: July 11, 2005 at 8:58 PM

run your rear output rca to the input of your RF and then run rcas from the out on the RF to the input on the Sony

Print Page | Close Window