Print Page | Close Window

Audio Control EQS question

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59143
Printed Date: May 28, 2024 at 11:16 PM


Topic: Audio Control EQS question

Posted By: crispycritter91
Subject: Audio Control EQS question
Date Posted: July 10, 2005 at 12:53 AM

I am trying to change the "PFM" or subsonic x-over frequency to a lower setting. I've tried googling for a retailer that has this chip to replace but no luck. I have also looked around the Audio Control site. Does any one know where to purchase this chip from or how to make one?



Replies:

Posted By: haemphyst
Date Posted: July 10, 2005 at 1:46 AM
Go to your local electronics store - NOT Radio Shack... ask for a 14 pin DIP header and (6) 1% resistors of the desired value. To figure the value, use this document... It's really easy to build them, or AudioControl has them for $10.00 in stock. Shipping should be a couple more dollars.

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."



Posted By: crispycritter91
Date Posted: July 11, 2005 at 6:25 AM
Man, thanks! Time to start working on this.


Print Page | Close Window