how to make components louder?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59268
Printed Date: May 09, 2025 at 11:38 AM
Topic: how to make components louder?
Posted By: ninchnails
Subject: how to make components louder?
Date Posted: July 12, 2005 at 3:06 AM
Originally I was wondering if I could use a resistor wired in parallel to drop the resistence of my components from 4ohms to 2. After researching, I have found this cannot be done (see I read the forums). My question is simple, is there any practical way to reduce the resistance and get more power to a set of speakers. Specifically Polk Momo 6.5" component's. Could I possibly mess around w/ the crossover, or is the whole idea just a waste of time and energy?
Replies:
Posted By: NowYaKnow
Date Posted: July 12, 2005 at 6:25 AM
If you want more power get a bigger amp.
Mike
Posted By: TruckSystem
Date Posted: July 12, 2005 at 9:06 AM
Bigger amp is the way to go.
-------------
2003 Chevrolet Silverado Standard Cab ~ Alpine CDA-9851
Diamond Audio D3600.1 ~ 2x Diamond Audio TM310D4
Diamond Audio D3400.4 ~ Diamond Audio Hex S600s
AstroStart RS5204 Remote Start/Alarm
Posted By: ninchnails
Date Posted: July 12, 2005 at 1:15 PM
yeah, that's what I thought, it was just wishfull thinking.
Posted By: boulderguy
Date Posted: July 12, 2005 at 5:25 PM
you could listen harder...seriously, although it's more expensive than a new amp, try Dynamat.
-------------
|