RCA jacks
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59441
Printed Date: May 16, 2024 at 5:47 AM
Topic: RCA jacks
Posted By: theconartist
Subject: RCA jacks
Date Posted: July 14, 2005 at 7:08 PM
otaye i have another question, i don't have a stereo well i do but it is a factory stereo, which i don't want to change cause it is the one that resets my oil change light, tire pressure, dome lights, etc... is all done with the stereo, i have a monte carlo 2003 to clear things up. So how do i get the voice to come through my stereo to my amp? do i cut the RCA jacks and splice the wires to the speakers in the car, or how do i do this. i tried this out, there are four wires from the RCA jacks two red and one yellow and one white, do i hook up the red and white to one speaker and the other red and yellow to the other speaker? any help would be appreciated. Thanks Cole.
Replies:
Posted By: boulderguy
Date Posted: July 14, 2005 at 7:16 PM
Cole - you'll have to be a LOT more specific & clear, your description makes less sense than an inflatable dartboard.
-------------
Posted By: auex
Date Posted: July 14, 2005 at 7:21 PM
Are you tring to hook an amp up to your existing stereo or are you trying to tie another device, like a mp3 player, to your existing stereo?
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: furflier
Date Posted: July 14, 2005 at 7:23 PM
Get a loc (line out convertor).You can pick one up at any stereo shop.
-------------
Posted By: theconartist
Date Posted: July 14, 2005 at 7:36 PM
my factory stereo doesn't have rca jacks hook ups, so how do i get the voice to my subs,
Posted By: theconartist
Date Posted: July 14, 2005 at 7:38 PM
auex]A wrote:
e you tring to hook an amp up to your existing stereo
exactly what i am trying to do, but my factory stereo doesn't have rca hook ups, so do i slice my rca's into the speakers wires to get the sound, and if so how do i do that exactly? Thanks Cole.
Posted By: boulderguy
Date Posted: July 14, 2005 at 7:48 PM
The dartboard's punctured. Nontheless, what you need is the LOC mentioned before. Go to any car stereo shop or order from Crutchfield. Run speaker wires from stereo into LOC, then RCA from LOC to amp, then speaker wire from amp to speaker. -------------
Posted By: auex
Date Posted: July 14, 2005 at 8:04 PM
Also you don't want your subs playing anything with voices involved.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
|