Jenson VM9510, Chevy Tahoe

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59895
Printed Date: May 14, 2025 at 1:00 AM

Topic: Jenson VM9510, Chevy Tahoe

Posted By: jabjib
Subject: Jenson VM9510, Chevy Tahoe
Date Posted: July 22, 2005 at 9:41 PM

I just installed Jenson VM9510, into my Chevy Tahoe. I had to get the fancy wiring harness so that I could use the door locks, the dome light, blah blah blah. I got everything hooked up and I can't get any sound to come out of the speakers. I plugged in my old one to make sure I didn't blow something and it works fine. Some one please help, I want to get this done tonight.

Replies:

Posted By: nowlater123
Date Posted: July 22, 2005 at 10:17 PM

It might be the wire connections on the harness. Double check those, and make sure the unit is properly grounded.

-------------
Kenwood all the Way!

Posted By: ss-installer
Date Posted: July 22, 2005 at 11:45 PM

does everything work except for sound? if so, try connecting the blue wires to turn on the factory amp.

-------------

Posted By: jabjib
Date Posted: July 23, 2005 at 7:26 AM

ss-installer wrote:

does everything work except for sound? if so, try connecting the blue wires to turn on the factory amp.

Good Man.....Good Man.....That was it thanks for you help boys!!!

Print Page | Close Window