PPI PC 2350 Amplifier Questions

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60024
Printed Date: June 10, 2024 at 6:48 AM

Topic: PPI PC 2350 Amplifier Questions

Posted By: chrismiddleton
Subject: PPI PC 2350 Amplifier Questions
Date Posted: July 25, 2005 at 6:26 AM

I recently bought this amplifier to power my system. I was told that this amplifier is "350 per channel and 1400 bridged". Is this amplifier really bridgable to 1400 watts and if so how would I bridge it to put out 1400 watts to one sub? Does anyone have any info?

Thanks,

Chris

Replies:

Posted By: stevdart
Date Posted: July 25, 2005 at 6:48 AM

...into what sub?

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Posted By: chrismiddleton
Date Posted: July 25, 2005 at 7:05 AM

It is a Atomic sub.

The one in this link.

https://www.atomicspeakers.com/productinformation/loudspeaker/ele/ele15d2.html

It is Dual voice coil sub.

Posted By: stevdart
Date Posted: July 25, 2005 at 7:48 AM

If that's a two channel amplifier you would wire the 2 ohm voice coils in series for a 4 ohm load. Post a link to that amp for a look at the specs.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Posted By: chrismiddleton
Date Posted: July 25, 2005 at 7:53 AM

I dont have a link for the amp specs and cant find any specs on the amp. If you want a pic of the amp I can take one and post it. If any of yall have specs please post. Ima ask a few other forums to see if anyone has the specs for the amp.

THanks,

Chris

Print Page | Close Window