How to power 12 coaxials off one amp?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60050
Printed Date: April 29, 2024 at 4:33 AM
Topic: How to power 12 coaxials off one amp?
Posted By: AJRXtreme
Subject: How to power 12 coaxials off one amp?
Date Posted: July 25, 2005 at 3:12 PM
I was at a car show yesterday and i saw a Suburban with (14) 3" coaxials in each door, the truck had 4 doors, so he had 54 coaxials inside his car. He only had 3 amps on all these speakers. I plan on doing the same thing to my car but i want to build a tower with 12 coaxials. I want to know how i would be able to power all those speakers off one amp? Also what amp would i use? Thankyou
------------- 03 F150 on 24's
HU:Pioneer DVD5700
Frt:MC57
Subs:(12)S12L7
Amps:(3)KX2500.1's, MC-2004
Replies:
Posted By: DYohn
Date Posted: July 25, 2005 at 3:39 PM
Use any amp you like and any number of speakers you like. Just wire them in series-parallel so the net load on the amplifier does not drop below it's capability (generally 4 ohms.) It is a show trick, by the way, and will NOT help your sound. Indeed, multiple mains can hurt a lot more than they help. But it looks cool. ------------- Support the12volt.com
Posted By: AJRXtreme
Date Posted: July 25, 2005 at 3:42 PM
ok wow, i should have thought of that. Thankyou. I have one more question though. How do i use the crossovers that come with the speakers when i wire the speakers together? Thankyou Dyohn
------------- 03 F150 on 24's
HU:Pioneer DVD5700
Frt:MC57
Subs:(12)S12L7
Amps:(3)KX2500.1's, MC-2004
Posted By: DYohn
Date Posted: July 25, 2005 at 4:15 PM
Same as you would normally: one crossover per speaker set (woofer/tweeter). For 12 4-ohm speakers, wire four parallel sets of three in series for a net 3 ohms load on the amplifier channel, or three parallel sets of 4 in series for a net 5.33 ohms load on the amplifier channel. ------------- Support the12volt.com
Posted By: AJRXtreme
Date Posted: July 25, 2005 at 4:57 PM
I still dont get how to physically wire them. I need visualization, thankyou
------------- 03 F150 on 24's
HU:Pioneer DVD5700
Frt:MC57
Subs:(12)S12L7
Amps:(3)KX2500.1's, MC-2004
Posted By: DYohn
Date Posted: July 25, 2005 at 5:09 PM
Here's one suggestion (net 5.3-ohm load if all speakers are 4-ohms:) ------------- Support the12volt.com
|