Print Page | Close Window

mtx amp dual output

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60060
Printed Date: May 15, 2024 at 4:20 AM


Topic: mtx amp dual output

Posted By: jdog0411
Subject: mtx amp dual output
Date Posted: July 25, 2005 at 5:06 PM

I have an MTX monoblock amp that has two distinct sets of outputs for two subs. The manual states that the second output is just (for optional second subwoofer). If I wired two 4 ohm svc subs, one to each of the outputs (+ and - each), would the resulting load still be 4 ohms to each sub? Or would the amp be seeing a 2 ohm load and effectively pushing out half the total rated power to each sub?



-------------
2004 BMW 325ci.
Alpine CDA-9885
JL 300/4 and 250/1
JL XR 5.25 comps
Infinity Kappa Perfect 12




Replies:

Posted By: SoundAudio
Date Posted: July 25, 2005 at 5:56 PM
Connecting the subwoofers to both sets of terminals is like connecting them in parallel.

-------------
Good Luck!
-Thad


Print Page | Close Window