Print Page | Close Window

01 Chrysler Sebring Coupe

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6022
Printed Date: April 19, 2024 at 6:09 PM


Topic: 01 Chrysler Sebring Coupe

Posted By: pincky
Subject: 01 Chrysler Sebring Coupe
Date Posted: November 29, 2002 at 1:43 AM

posted_imageHi My question is that my factory radio is a 1.5 din

is there anyway that a double din radio would fit??

example the 01+  Mitsubishi Eclipse look like it has a double din opeaning and there interior is the same as in the sebring..?? if i were to take the center panel off of a eclipse and put it on my sebring wouldi be able to install a double din sized radio in its place???

or would i be able to modify my excisting center plate for a double din sized radio?

thanks ! Vince




Replies:

Posted By: SOUND PRESSURE
Date Posted: November 29, 2002 at 1:46 AM
If it's only a 1.5 din and your trying to fit a double din in that hole you will have to do some custom fitting.

-------------
Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!



Posted By: Velocity Motors
Date Posted: November 29, 2002 at 5:20 AM
The Mitsu is a double DIN and the Sebring is a 1.5 DIN, the opening on both vehicles are larger than the radio, so the 2 DIN will fit into the 1.5 DIN opening, but the trim piece will not. Custom work is needed for this as well as the brackets will need to be customized.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window