hardwire a roady2 in a 1997 F150

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60393
Printed Date: July 15, 2025 at 9:08 PM

Topic: hardwire a roady2 in a 1997 F150

Posted By: jrip
Subject: hardwire a roady2 in a 1997 F150
Date Posted: July 30, 2005 at 9:58 PM

I would like to hard wire my roady2 to the radio harness of a 1997 F150 so that it will power on when I turn the engine on and power off when Inturn the egine off. What are the wire colors on the harness tom achieve this.

Thanks.

jrip

Replies:

Posted By: shiftmx11
Date Posted: August 01, 2005 at 1:30 AM

https://www.installdr.com/Harnesses/Ford-Wiring.pdf

look to see which plug is in your truck and u will need use 12volt ignation wire and ground wire.

o yea roady2 runs off 6 volts so u need to do one of two thing use a cirgite lighter plug and wire it in and plug the roady2 in to it behind the radio or you can open up your roady plug and solder wires to the + - and run wires out and putt it back together and tape it all up

Print Page | Close Window