how to wire line converter on 05’ forenza

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60569
Printed Date: May 15, 2025 at 3:34 AM

Topic: how to wire line converter on 05’ forenza

Posted By: 150Db
Subject: how to wire line converter on 05’ forenza
Date Posted: August 02, 2005 at 8:55 PM

I have recently purchased a 2005 suzuki forenza and plan on adding an after-market amp/sub to the factory stereo. I was hoping to get some knowledge on how to go about "routing" the line converter needed to do so. I would appreciate any input on this, thank you.

Replies:

Posted By: Velocity Motors
Date Posted: August 02, 2005 at 9:41 PM

If your using an LOC that requires (-) & (+) then run the (+) from the ignition and ground somewhere near the rear of the vehicle. Have the LOC installed by the rear speakers and use them as your signal input.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window