Whats louder

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60791
Printed Date: May 02, 2024 at 6:23 AM

Topic: Whats louder

Posted By: adix5689
Subject: Whats louder
Date Posted: August 05, 2005 at 9:51 PM

I have 4 10inch alpine 1022d type r subsand 4 alpine mrd-605 amps. Whats is the best way to hook them up. 4 subs two mrd-605's. 3 subs and 3 mrd-605 amps. 2 subs and two mrd-605 amps. EAch amp is 400 x 1 at 4ohms or 600 watt x 1 at 2ohms.

Replies:

Posted By: wrathchild281
Date Posted: August 05, 2005 at 10:21 PM

somehow this question confuses me. i dont know maybe its just me

Posted By: adix5689
Date Posted: August 05, 2005 at 10:39 PM

Basicly the question is I have 1200watts of amp power. I can power 4 10inch subs with two mrd-605s at 600watts each at 2ohms total 1200 watts or 3 10inch subs with 3 mrd-605s at 400watts each at 4ohms total 1200 watts or 2 10inch subs with 2 mrd-605s at 600 watts each at 2ohms total 1200 watts . Which setup is better.

Posted By: sedate
Date Posted: August 05, 2005 at 10:56 PM

wrathchild281 wrote:

somehow this question confuses me. i dont know maybe its just me

no, no, I'm lost too.

adix5689 wrote:

Which setup is better.

Ahem.... *punctuation* por'favor ....

Okay.. Uhh. What kinda subs are you trying to run. That'd be kinda important to the answer.

-------------
"I'm finished!" - Daniel Plainview

Posted By: adix5689
Date Posted: August 06, 2005 at 5:06 PM

Iam alpine 10 inch swr-1022d. Sorry for the punctuation.

Posted By: mikegar
Date Posted: August 06, 2005 at 5:20 PM

your question is a little confusing but i think that i kinda understand it.

you should power each sub by one amplifier. and wire the voice of the individual drivers in a series. i dont know if that setup will have phase problems or not but it works out in my head

Print Page | Close Window