amp specs

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61005
Printed Date: May 13, 2024 at 8:53 AM

Topic: amp specs

Posted By: Steelcity
Subject: amp specs
Date Posted: August 09, 2005 at 1:57 PM

I have checked 3 different sites including the mfg's site to try and find the rms of this amp bridged at 4 ohms and have gotten 3 differnt figures 150-250 rms. Phoenix gold r2: 52

does anyone know what the correct figure is? I hope its not 150 watt rms.

Replies:

Posted By: DYohn
Date Posted: August 09, 2005 at 2:02 PM

Yes, it is 150 watts and it cannot be bridged into any lower impedence load. HERE's the manual.

-------------
Support the12volt.com

Posted By: Steelcity
Date Posted: August 09, 2005 at 2:10 PM

Damn is that phoenix gold 150 rms going to be enough to power a 400 watt sub and get decent bass? I looked at the mfg site and saw 250 rms and thought that was rms.

Posted By: Master Asylum
Date Posted: August 09, 2005 at 2:25 PM

I believe that'd be a matter of opinion... For me, probably not. For some, possibly plenty. :)

-------------
1998 Monte Carlo w/
Eclipse CD8454
2xRockford 5.25" Power 2-way T152C
2xRockford 6"x9" Punch 3-way FRC4369
1xMemphis 16-MCH1300 5-channel
2xKicker 12" L5 Solobaric-2 Ohm

Posted By: Steelcity
Date Posted: August 09, 2005 at 2:27 PM

Not really looking to shake the car. Just looking for some good bang from the rear. It will be going in a jeep liberty open cargo area.

Posted By: Steelcity
Date Posted: August 09, 2005 at 2:59 PM

Ok need some advice quick. Worried this phoenix gold 150 rms is to small to power the sub I'm getting. Which is better

Ma589I or the phoenix gold r2 52 or rockford fosgate 201S running at 4 ohm bridged 400 watt rms sub

Print Page | Close Window