99 range rover install

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61432
Printed Date: May 15, 2025 at 3:36 PM

Topic: 99 range rover install

Posted By: losingit
Subject: 99 range rover install
Date Posted: August 16, 2005 at 12:30 PM

I am getting ready to install a JVC KD-AVX1 a backup cam and a PAC universal steering wheel remote adapter in a 99 range rover it hear its a tricky install everything is supposed to run through the BCM and i would like not to lose the stock sub any tricks and tips would be helpful

Replies:

Posted By: tcss
Date Posted: August 16, 2005 at 2:32 PM

This truck comes with two different amplified systems. When you get the head unit out see if it has three plugs resembling stock Volkswagon plugs. Don't know if the steering wheel adaptor will work. Figure to use a hi level step down backwords. Let me know.

Posted By: losingit
Date Posted: August 16, 2005 at 5:09 PM

yes it has three plugs

Posted By: tcss
Date Posted: August 16, 2005 at 5:26 PM

Is there a pink plug? Does it have 6 or 8 wires? Is the bottom plug gray?

Posted By: losingit
Date Posted: August 16, 2005 at 5:40 PM

the top plug is yellow blue and green next one is brown and last one is gray with 6 wires

Posted By: losingit
Date Posted: August 17, 2005 at 12:33 PM

any help please

Print Page | Close Window