2 subs 1 amp, need suggestions
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61493
Printed Date: May 09, 2025 at 4:18 PM
Topic: 2 subs 1 amp, need suggestions
Posted By: shott8283
Subject: 2 subs 1 amp, need suggestions
Date Posted: August 17, 2005 at 12:28 AM
im confusing myself here....been in iraq for 7 months and the only stereo i did was a ghetto rig of a 10 inch sub and 200 watt amp in a humvee.... i got two subs that are 350 RMS 700 max a peice.... i need suggestions for what amp... what rating amp should be put to these.. the are DVC 2ohm subs... need a good match... oh they are hifonics zeus line... thanks fellas
Replies:
Posted By: mini14
Date Posted: August 17, 2005 at 1:43 AM
you need a 4 channnel amp i mean idk what else to use unless you can get 2 2 channel amps i have 2 xtant 2 channels and 2 ppi 2 channels if you are interested
-------------
Alpine CDA-9847---Alpine MRP-T220---Eclipse 36201---6.5" Type S Components---6.5" Type S Coaxials---2 10" Thunder6000's Isobaric
Posted By: TruckSystem
Date Posted: August 17, 2005 at 8:07 AM
I would suggest getting a monoblock that runs around 700 RMS at 2 ohms for them.
-------------
2003 Chevrolet Silverado Standard Cab ~ Alpine CDA-9851
Diamond Audio D3600.1 ~ 2x Diamond Audio TM310D4
Diamond Audio D3400.4 ~ Diamond Audio Hex S600s
AstroStart RS5204 Remote Start/Alarm
Posted By: Francious70
Date Posted: August 17, 2005 at 1:29 PM
Buy a Phoenix Gold Xenon 600.1
600 watts RMS @ 2 ohms.
wire them like this
Paul
Posted By: chrisAWD
Date Posted: August 17, 2005 at 8:55 PM
kicker kx600.1
mtx ta5601
both rated at 600 rms at 2 ohms, both will prolly come with birth certificates of around 700
Posted By: jeffchilcott
Date Posted: August 17, 2005 at 9:43 PM
mini14 wrote:
you need a 4 channnel amp i mean idk what else to use unless you can get 2 2 channel amps i have 2 xtant 2 channels and 2 ppi 2 channels if you are interested
Why would he need a 4 channel????? Run a mono amp rated at 600-800rms at 2 ohm, this would power just fine. Or you could go with a 2 channel rated at 300-500 per channel at 1ohm stereo ------------- 2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: chrisAWD
Date Posted: August 17, 2005 at 9:49 PM
jeff, we all know.....hehe...relax.....he just has an xtra chromosome.
-------------
car 1 = alpine 9807, mtx 404+mtx 311d, polk speakers, kappa 10"
car 2 = pioneer 7700, kicker 400x1, kicker 60x4, 10"compvr x2, kappa speakers
Posted By: mini14
Date Posted: August 18, 2005 at 9:12 AM
you could use all 3 jeffchilcott calm down
-------------
Alpine CDA-9847---Alpine MRP-T220---Eclipse 36201---6.5" Type S Components---6.5" Type S Coaxials---2 10" Thunder6000's Isobaric
|