amp for sub question
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61495
Printed Date: May 14, 2024 at 11:31 AM
Topic: amp for sub question
Posted By: Merciless
Subject: amp for sub question
Date Posted: August 17, 2005 at 12:53 AM
hi everybody ive got 2 jl audio 10w0 at 9 ohms in a box routed parrallel and i have a sony 2/1 channel amp that peaks at 760w my question is should i bridge the 2 channels and make it a mono and if yes does anybody know where the switch to do that is (if there is one) thanks
Replies:
Posted By: mini14
Date Posted: August 17, 2005 at 1:47 AM
yea you should bridge it idk about sony but most amps i've seen you just put the negative wire in one channel and the positive in another i could be wrong though
-------------
Alpine CDA-9847---Alpine MRP-T220---Eclipse 36201---6.5" Type S Components---6.5" Type S Coaxials---2 10" Thunder6000's Isobaric
|