Drawings for innstalling rear speakers

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61678
Printed Date: September 14, 2025 at 11:39 AM

Topic: Drawings for innstalling rear speakers

Posted By: Yraweolkjrer
Subject: Drawings for innstalling rear speakers
Date Posted: August 19, 2005 at 11:56 AM

Hello! I'm from Norway, so please bare with me and my English :)

I want to innstall rear speakers, similiar to to those in the link below.

https://boom-sound.en.alibaba.com/offerdetail/50956347/Sell_Car_Speaker.html

I need to cut "holes" in the back and need, if it's the right word, drawings for it...understand?

Thanx a lot!

Replies:

Posted By: DYohn
Date Posted: August 19, 2005 at 12:01 PM

What you're looking for is called a "template" in English. Most car audio sets like that will include such a template with the installation instructions. If they do not, you can make one by using a piece of paper and trimming it with scissors until it fits perfectly, then use this to make the cuts in your vehicle.

Cheers.

-------------
Support the12volt.com

Print Page | Close Window