Amp mounting question

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61829
Printed Date: May 11, 2025 at 3:26 PM

Topic: Amp mounting question

Posted By: idografix4u
Subject: Amp mounting question
Date Posted: August 22, 2005 at 10:40 AM

I am installing two Fast and Furious amps in my daughters car.I want to counter sink thim in the FG enclosure I am building.I plan on backlighting them too.My question is.How do I hide the wires?Do they make an end cap for these?Will I just have to fab my own out of FG?Thanks,Steve.

Replies:

Posted By: forbidden
Date Posted: August 22, 2005 at 1:48 PM

No they do not make end caps for these amps. I would build something to hide the wires, to me it sounds like you are on the right track.

-------------
Top Secret, I can tell you but then my wife will kill me.

Posted By: Autobot_Prime
Date Posted: August 22, 2005 at 8:36 PM

hey there

if you do have to build a custom cover i found on my last project that vanity board works the best you can even encorporate plexi-glass and that makes it look vey sleek.

Posted By: idografix4u
Date Posted: August 22, 2005 at 9:08 PM

Vanity boards?

Print Page | Close Window