Power Distribuion for small Eq
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61842
Printed Date: May 03, 2024 at 5:15 AM
Topic: Power Distribuion for small Eq
Posted By: tmacie
Subject: Power Distribuion for small Eq
Date Posted: August 22, 2005 at 1:40 PM
Hi everyone,
I searched around a bit but couldnt find what I am looking for. Is there a product out there that allows power distribution for eq with low power requirements? say up to 16ga wire? Things like screens, headunits ect. I've looked locally (not much around here) and on the internet and cant finda anything. Anyone have any leads? i want something a little neater than twisting wires together and shoving into a crimp cap.
Thanks,
Travis
Replies:
Posted By: CCroadshoptn
Date Posted: August 22, 2005 at 4:29 PM
Souder them? Or fashion your own with a small fuse block.
-------------
Mecp Certified
Double check advice with your Meter.
Posted By: customcarchris
Date Posted: August 22, 2005 at 7:07 PM
Use a small fuseblock that you can pick up at any autoparts store for around $6. It will have one wire in, then several small fused out links that work great for little wires like these.
Posted By: tmacie
Date Posted: August 23, 2005 at 7:19 AM
Chris,
Good thought. I find it hard to believe that all the "hookup product" companies don't have something like this with all the screens and other stuff that is going into cars these days.
Travis
|