Print Page | Close Window

12" MTX eliminator enclosureless

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61858
Printed Date: May 13, 2025 at 11:56 AM


Topic: 12" MTX eliminator enclosureless

Posted By: idografix4u
Subject: 12" MTX eliminator enclosureless
Date Posted: August 22, 2005 at 9:15 PM

I picked up two 12" MTX eliminator enclosureless subs today.I also picked up two 12" duals in a nice bandpass box.

I was thinking of incorporating the bandpass boxinto my enclosure.Actually use it for the front  and add to the rear of it for two more 12"s that are sealed or ported.What do you guys think?Which speakers should I use in the bandpass and which should I port or seal?

The MTX's how should they be ran?Sealed?Ported?Bandpass?

What about the Duals are they crap?Heres a link to them.

Thanks ahead.

https://shop.store.yahoo.com/americanesuperstore/xinbp-212.html




Replies:

Posted By: jeffchilcott
Date Posted: August 22, 2005 at 10:23 PM
do not run 2 diffrent type of boxes and or 2 diffrent types of subs.

-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place




Posted By: idografix4u
Date Posted: August 22, 2005 at 10:34 PM
Well after some research and picking up the MDF board ,now I see I don't have the room.This is going to be my wifes ride for the next year or so.Til the daughter can drive.I may just see which set sounds best in the bandpass and go that route.Maybe I could just run two of them in a FG enclosure.I just want her to be able to enjoy the thump.She hasn't had a decent system for a while.The daughter will be getting it later.By then it should be pretty nice.
What should I do?I don't want to sink any more money in it right now.
How would you guys go about setting this up?
Heres what I have:
2 12" MTX enclosureless subs
2 12" Dual subs https://www.audio-direct.com/cgi-bin...emnum=XINBP-212
2 Lightning audio FF150.2 amps
A nice bandpass box
A good bit of MDF board
I know none of this is high quality equipment.I'm just trying to work with what I have .With the cost of gas here I have to get this car on the road.




Posted By: dwarren
Date Posted: August 22, 2005 at 10:45 PM

Build a box for those MTX woofers. Contact MTX with enclosure requirements and what they recommend. 1-800-call-mtx. 

Bandpass enclosures are lame.



-------------




Posted By: idografix4u
Date Posted: August 22, 2005 at 10:56 PM
Sounds like a good idea.I think I'll try it tommorow.Thanks.




Posted By: idografix4u
Date Posted: August 23, 2005 at 9:20 PM
I called them.They offered me $110.00 trade in on a new set.I went ahead and threw in the bandpass and wired a Lightning audio amp to each sub.It pounds.I was really supprised.Thanks guys.




Posted By: idografix4u
Date Posted: August 23, 2005 at 11:06 PM
oh yeah,i used 10 guage wire on everything.i mean every wire in the complete system is 10 awg.how much difference will i notice when i wire it with the good heavy wiring?




Posted By: dwarren
Date Posted: August 23, 2005 at 11:15 PM

Nothing.

Use the power and ground calculator to the left or this link: https://www.the12volt.com/info/recwirsz.asp



-------------





Print Page | Close Window