Print Page | Close Window

Mounting enclosure for my mid drivers

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62058
Printed Date: May 18, 2024 at 8:07 PM


Topic: Mounting enclosure for my mid drivers

Posted By: action1978
Subject: Mounting enclosure for my mid drivers
Date Posted: August 25, 2005 at 5:31 PM

I am building custom door panels to hold my 6-1/2 in mid drivers.  What should I consider when it comes to sealed vs. vented enclosure for these speakers? 

Thanks




Replies:

Posted By: DYohn
Date Posted: August 25, 2005 at 9:08 PM
What kind of speakers are they?  Do you have the T/S parameters for them?

-------------
Support the12volt.com



Posted By: action1978
Date Posted: August 26, 2005 at 9:14 AM
They are some old alpine DD Drives.  I don't have the data on them.  But soon I plan to replace them with some Infinity Kappa's.



Posted By: DYohn
Date Posted: August 26, 2005 at 10:16 AM
You shouldn't need an enclosure for those speakers.

-------------
Support the12volt.com



Posted By: action1978
Date Posted: August 26, 2005 at 11:19 AM

Okay, but I do need to build something to hold them.  Should I just leave the back of the speaker open? what about the ones in the rear of the car,  what kind of difference am I going to see if they are enclosed or if the backs of the speakers are just open?  None? 

Also, thanks for your help.  I usually get a lot more replies to questions on here.





Print Page | Close Window