Print Page | Close Window

line level questions

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62186
Printed Date: May 12, 2025 at 2:44 PM


Topic: line level questions

Posted By: stang351w
Subject: line level questions
Date Posted: September 04, 2005 at 11:32 AM

hello, i was just wonderingthe best way to run a line level converter, to completly disconnect the rear speakers or just tap into the wires ?  i've been told the best way is to completly disconnect the speakers but  i've also been told not to...anyone?

-------------
Tri County KustomZ
certified installer



Replies:

Posted By: Blowntweeters
Date Posted: September 04, 2005 at 12:29 PM
just tap into the wires so you can keep the rear speakers going line out converters are designed to be ran with the speakers playing

-------------
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700



Posted By: DYohn
Date Posted: September 04, 2005 at 12:29 PM
It usually doesn't matter.  It depends on what you're trying to do.

-------------
Support the12volt.com


Print Page | Close Window