DVC 2ohm Wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62446
Printed Date: July 05, 2025 at 7:48 PM

Topic: DVC 2ohm Wiring

Posted By: jettagli03
Subject: DVC 2ohm Wiring
Date Posted: September 09, 2005 at 3:17 PM

Im planning on purchasing an Image Dynamics IDMAX12 D2, which is of course means its a DVC 2 ohm per coil subwoofer, from a friend (pretty much brand new but he needs money) and am wondering if its possible to wire that sucker up in a 2 ohm total load or if i should just wire it in a series for 4 ohms... anyone know if this is possible and/or how to do it?

-------------

Replies:

Posted By: dwarren
Date Posted: September 09, 2005 at 3:22 PM

You can either get a 1 ohm load or a 4 ohm load with this woofer.

this calculator

-------------

Posted By: jettagli03
Date Posted: September 09, 2005 at 3:22 PM

yeah thats what i thought but i thought it would be nice to be able to run it at 2 ohms and give it some more power.. oh well :-P

-------------

Posted By: dwarren
Date Posted: September 09, 2005 at 3:40 PM

what amp are you using?

-------------

Posted By: jettagli03
Date Posted: September 10, 2005 at 11:31 AM

JBL GTO1201.1 -- not the greatest but i picked it up for about $150 NIB

-------------

Posted By: DYohn
Date Posted: September 10, 2005 at 11:55 AM

You got a GTO1201.1 for $150? What, was it off the back of a truck? That is a great amp. Run your sub at 4-ohms and it'll be fine.

-------------
Support the12volt.com

Print Page | Close Window