sub box for 2 10 apline type e

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62507
Printed Date: July 07, 2025 at 10:36 PM

Topic: sub box for 2 10 apline type e

Posted By: gi jesus
Subject: sub box for 2 10 apline type e
Date Posted: September 10, 2005 at 9:19 PM

hey can anyone give me a general idea or plan for a vented /ported box for 2 10'' type e apline subs

any info is greatly apperciated and you can e-mail me at asniperforhire@hotmail.com with any information

thx

gi jesus

Replies:

Posted By: dwarren
Date Posted: September 10, 2005 at 10:07 PM

Alpine only lists sealed enclosure volumes which are .8-1.7ft^3. You may want to call Alpine and talk to a tech, they may have have other suggestions. You can download the owners manual from the site, look under the "tech" link. https://www.alpine1.com.

-------------

Posted By: stevdart
Date Posted: September 10, 2005 at 11:38 PM

Actually the range of volume per sub is 0.6 to 1.25 cu ft for the 10" SWE1041. Keep this subwoofer in a sealed box for best performance. Although a lot of subs can be used in either sealed or ported, this one needs sealed only.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Posted By: dwarren
Date Posted: September 10, 2005 at 11:54 PM

Good call stevdart, I think I was looking at the tech sheet for the 12" model.

-------------

Print Page | Close Window