Making a New Audio Board for New Shop
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62523
Printed Date: May 06, 2024 at 9:01 AM
Topic: Making a New Audio Board for New Shop
Posted By: newinstaller
Subject: Making a New Audio Board for New Shop
Date Posted: September 11, 2005 at 9:25 AM
Hi,
We are relocating our store. It is a much bigger store and I am bringing in alot more audio. I am getting a AUDIO DISPLAY BOARD custom made and need some ideas. Anyone have a shop that has some pics of there display board. I am not looking to copy someones board rather get some ideas.
Any help advice would be great :)
Thanks for your time
Replies:
Posted By: JoeMetal
Date Posted: September 11, 2005 at 9:38 AM
I don't own an audio shop or anything, but I think it'd be pretty neat if you could find a way to make your display board out of fiberglass. You could just use the regular wood in the back, and then make fiberglass fronts so you can get some nice smooth curves in it.
Posted By: Velocity Motors
Date Posted: September 11, 2005 at 9:50 AM
Talk to Rob at Forbbiden Audio. He's making himself a monster board ( 18 ' long ). I'm sure he can give you some pointers.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: newinstaller
Date Posted: September 11, 2005 at 10:01 AM
Hi,
Where is Rob located at Forbbiden located?
Thanks
Posted By: Velocity Motors
Date Posted: September 11, 2005 at 3:17 PM
Rob's over in Victoria, BC . You can PM him if you wish through the forum. Just look up his user ID, forbidden
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|