Print Page | Close Window

4 ohm SVC Parrallel wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62950
Printed Date: June 09, 2024 at 12:45 PM


Topic: 4 ohm SVC Parrallel wiring

Posted By: udloze
Subject: 4 ohm SVC Parrallel wiring
Date Posted: September 20, 2005 at 6:11 AM

posted_image can anyone tell me how i can join the wires where they are supposed to. (in the red circles) any info at all will be much appreciated. cheers

-------------
///ALPINE



Replies:

Posted By: sk8ingsmurf
Date Posted: September 20, 2005 at 7:01 AM
really depends on what kind of terminals you have on the speakers, if they are push ones just twist both wires (one incoming one outgoing) together and jam them in there, if it has spade terminals just solder both wires onto the terminal.  Cant think of any other common ones but just remember what you are looking for is strong solid connection of two conductive materials (the wires of course), so if its some weird sort of terminal just be creative;



Posted By: stevdart
Date Posted: September 20, 2005 at 9:29 AM
There's an answer or two IN THIS THREAD that explains why diagrams are shown like that.  You just should know that a connection between two or more wires can take place either at the terminal or on the wires themselves.



Posted By: udloze
Date Posted: September 21, 2005 at 3:40 AM

thank you heaps guys

stevdart; that link helped me alot it has now solved my problem, cheers



-------------
///ALPINE


Print Page | Close Window