looking at a class D alphasonik. PMA1200 DA. its for about $500. question is. lets see..
2400 watts RMS at 1ohm mono
is that a true 2400 watts? and the amp is 1ohm stable. the THD is <0.08%
Common Features |
• Linkable with Second Identical Model (Hardware Included) • Hour Meter • Remote Mount PMA100V Digital Volt Meter • Remote Mount PMA10B Bass Boost Control • Heavy Duty One-Piece Extruded Aluminum Heat Sink • Beveled Clear Acrylic Protective Cover • Tiffany-Style RCA Jacks • Parallel Line-Out RCA Jacks • Removable Aluminum Side Covers Conceal Control & Terminal Panels • MOSFET High-Speed Switching Power Supply • Milspec Double-Sided Glass Epoxy Circuit Board w/ Through-Hole Plating • Heavy 4 oz. Pure Copper PC Traces at All Preamp & Amplification Stages | • Internally Mounted Fan-Cooled Power Supply • Solid Brass Nickel-Plated Terminal Blocks (4-Gauge Power, 8-Gauge Speaker) • Variable Low-Pass Filter: 50Hz - 150Hz @ 24dB/Octave • Variable Subsonic Filter: 15Hz - 40Hz @ 24dB/Octave • Variable Bass Boost @ 45Hz: 0 - +18dB • Variable Phase Shift: 0 - 180° • THD: <0.08% • Signal-to-Noise Ratio: >100dB • Frequency Response: 5Hz - 250Hz • Input Impedance: 10kŮ • Input Sensitivity: 300mV~8V • 4-Way Protection Circuitry: Thermal, Short Circuit, Overload & DC Offset • Cooling Fan(s) |
those are the specs from alphasonik.com anyways.. should i go with something like that or something like JL Audio 1000x1 or what? or maybe even a hole alpine system. i was thinking about gettin the alphasonik PMA1200 and two of the new 900series subs they have comin out. i can get those for like 275 each. any feedback is greatly appreciated.
thanks
b.t.w. i have a Alpine D310 dvd player (head unit) with a ps2.
-------------
SSounds
Why don't you try this link for starters. https://www.the12volt.com/installbay/forum_posts.asp?tid=62621&PN=2
Hopefully you will get something from this
-------------
hoaxs] wrote:
ut it has an hour meter
Yeah!! What the heck is that? LOL!
-------------