1994 mazda mx-6 audio

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63103
Printed Date: May 14, 2024 at 10:15 AM

Topic: 1994 mazda mx-6 audio

Posted By: mazdaspeedotc05
Subject: 1994 mazda mx-6 audio
Date Posted: September 22, 2005 at 7:39 PM

To whom it may concern,

i've got 1994 mazda mx-6 with a stock radio, today i bought a 1,000 watt amp and i was wondering i anyone had any recomendations on how i should get power to it can anyone help?

-------------
Joseph W. Crowell

Replies:

Posted By: Velocity Motors
Date Posted: September 22, 2005 at 8:50 PM

Hey Joseph, first off you should get yourself a 4 or 2 gauge power wire and equal size ground for the amplifier. Fuse accordingly & use this guide to help you:

https://www.the12volt.com/info/recwirsz.asp

You will most likely need to drill a hole into the fire wall to pass the power wire through to the engine. Fuse 18" from the battery with a ANL or circuit breaker type fuse. YOu will need a LOC or if the amp has high current inputs you can use the speaker outputs of the rear speakers for an input signal. Also what are you going to power with this amp ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: mazdaspeedotc05
Date Posted: September 24, 2005 at 11:16 AM

Jeff, thank you for your response

i've have two Pioneer 500 Watt subs that i'm going to use.

-------------
Joseph W. Crowell