2001 honda cr-v door speakers

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63128
Printed Date: April 27, 2024 at 12:58 PM

Topic: 2001 honda cr-v door speakers

Posted By: beezu
Subject: 2001 honda cr-v door speakers
Date Posted: September 23, 2005 at 1:39 AM

hey my gf's dad is trying to put new speakers in his cr-v's front doors. he is pretty stubborn and is trying to do it without cutting off the factory harness that the stock speakers plug into do you guys have any suggestions i can tell him . i told him to just cut the harness off and put new ends onto the wires but no he wants to go to the junkyard and buy stock speakers to take the factory harness off and attach it to his speakers........if he connects new connecters to the speaker wires will he be able to re-attach the factory speakers if he ever wants to sell the truck? and does any one know what this harness looks like cause i haven't seen it. i put his headunit in for him and he was trying to help and he made the process last for 2 hours so i haven't even looked at his speakers lol.....please help

Replies:

Posted By: Velocity Motors
Date Posted: September 23, 2005 at 7:30 AM

Why doesn't he just splice into the existing wire about 2" from the plug and wrap the new wire around the splice & solder the connection.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: sneakycyber
Date Posted: September 23, 2005 at 11:44 AM

Metra Makes factory speaker harness adapters. There just plug and play they have all the correct terminals on them.. They go for around 10 bucks.. Check the web, if you cant find them P-M me and I will tell you where to get them. EDIT: Metra part number 72-7800

-------------

Posted By: junior40er
Date Posted: September 23, 2005 at 6:24 PM

sneakycyber wrote:

Metra Makes factory speaker harness adapters. There just plug and play they have all the correct terminals on them.. They go for around 10 bucks.. Check the web, if you cant find them P-M me and I will tell you where to get them. EDIT: Metra part number 72-7800

exactly, either splice into wires without cutting harness or buy harness plug at circuit city for like 10 bucks and you'll make sure it's in phase this way too posted_image