would this set up work
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63521
Printed Date: May 19, 2024 at 10:21 AM
Topic: would this set up work
Posted By: colaroaster
Subject: would this set up work
Date Posted: September 29, 2005 at 11:44 PM
i have the cdt audio ef-61cfi componet set and my plan is too power it with the soundstream xta 360.4, bridged into 2 channels. will this amp do a good job, as far as sq and power? i realize that the amps 180x2, but will amp perform well enough for the cdt's?
Replies:
Posted By: colaroaster
Date Posted: September 29, 2005 at 11:50 PM
Posted By: dwarren
Date Posted: September 30, 2005 at 1:59 AM
Why do you want to bridge the amp? Why not just get a larger two channel amp, like the 480.2 or 600.2?
-------------
Posted By: colaroaster
Date Posted: September 30, 2005 at 7:35 AM
the only reason i plan too bridge the amp is because i already have it sitting around. i considered getting a better amp but my budget has gotten very minimal. im just trying too utilize what i currently have, my other amp options that i have would be precision power a300 ( 75x2 @ 4 ohms) or the orion extreme 400 ( 100x2 @ 4 ohms). the reason im thinking about the soundstream and not one of the other is i want too power the cdt's correctly for best performance and sound.since rms on the cdt's is 150 i thought powering it with 180 would be better than 75 or 100.
|