2004 Ford Explorer

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63666
Printed Date: May 11, 2024 at 11:28 PM

Topic: 2004 Ford Explorer

Posted By: Steelcity
Subject: 2004 Ford Explorer
Date Posted: October 02, 2005 at 7:06 PM

Just installed a new hu on this ford explorer and trying to get the steering wheel controls to work, also the outside temp is not working now. There was a second plug in the stock hu that could not be plugged into the new hu. What can be done about this?

Replies:

Posted By: Steelcity
Date Posted: October 03, 2005 at 9:18 AM

anyone on this?

Posted By: sneakycyber
Date Posted: October 03, 2005 at 9:30 AM

Use PAC SWI-X this will allow retention of factory steering wheel controlls using an IR blaster. Not sure what you may have done for the outside temp controll, check for a blown fuse. EDIT: an Ir blaster converts your controll information into an infrared signal that is transmitted through an led that you locate near the aftermarket HU

-------------

Print Page | Close Window