Print Page | Close Window

SWR-1042D t/s parameters

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63715
Printed Date: July 18, 2025 at 4:08 PM


Topic: SWR-1042D t/s parameters

Posted By: Alpine Guy
Subject: SWR-1042D t/s parameters
Date Posted: October 03, 2005 at 1:08 PM

Can someone please post or PM the specs for the alpine SWR-1042D sub, im going to build a ported box for my brother but lost my manuals.

-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.



Replies:

Posted By: tcss
Date Posted: October 03, 2005 at 3:43 PM

External Dim. 12.5" X 14.5" X 17.5"

Gross internal volume 1.3 cu ft

Vent area 11 sq in

Vent length 22"

Vent displacement .237 cu ft

Net internal volume 1 cu ft

F3, ripple, Fb = 30hz, 3.5 db, 36hz



-------------
There is no such thing as free installation!




Posted By: Alpine Guy
Date Posted: October 03, 2005 at 4:11 PM

Is that the alpine reccomended box?  I wana get the specs if possible so i can plug it into winisd pro and play around with it to suit it for his listening style.

Thanks tcss



-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.




Posted By: tcss
Date Posted: October 03, 2005 at 4:24 PM
Taken directly from Alpine's dealer guide. What other specs do you need?

-------------
There is no such thing as free installation!




Posted By: Alpine Guy
Date Posted: October 03, 2005 at 9:46 PM
if i could get stuff like the fs, qes, qms, qts, vas, re, le, bl, xmax, sd, spl,  and such if possible please.

-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.




Posted By: tcss
Date Posted: October 04, 2005 at 11:38 AM

qes = .53

qms = 8.67

qts = .5

sd = 332

spl = 83 db  1w/1m

vas = .71 cu. ft.

This is all they list for what you asked for. Hope it helps.



-------------
There is no such thing as free installation!




Posted By: Alpine Guy
Date Posted: October 04, 2005 at 12:10 PM

Perfect thanks, the alpine reccomended box was a little too spl peakish, extend the port to about 25" long and it should give me a nice all  around box.

Thanks for your help tcss



-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.




Posted By: rustyspring03
Date Posted: October 04, 2005 at 3:54 PM
if its not too much trouble could you do the same for the swr-1242d ... i hate that alpine doesnt list this stuff on there site.. .i also lost the manual

-------------
Rusty Spring
98 s10 reg cab
Type R 12 Inverted between seats
Type R 6.5 for doors
Type S 5.25 on the dash
Alpine MRD-M605 mono
Alpine MRV-F345 4ch




Posted By: tcss
Date Posted: October 04, 2005 at 4:13 PM

sealed box vol. = .7 to 1.0 cu. ft.

vas = 1.6 cu ft

qms = 7.89

qes = .5

qts = .47

sd = 480

spl = 85db 1W 1M



-------------
There is no such thing as free installation!




Posted By: rustyspring03
Date Posted: October 04, 2005 at 11:18 PM
thanks i actually found that you can dl manuals off of crutchfield for free and they've got just about everything there

-------------
Rusty Spring
98 s10 reg cab
Type R 12 Inverted between seats
Type R 6.5 for doors
Type S 5.25 on the dash
Alpine MRD-M605 mono
Alpine MRV-F345 4ch





Print Page | Close Window