Need dimensions for Van Gogh 12

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63719
Printed Date: November 04, 2025 at 6:19 AM

Topic: Need dimensions for Van Gogh 12

Posted By: ice8168
Subject: Need dimensions for Van Gogh 12
Date Posted: October 03, 2005 at 1:47 PM

My Van Gogh subs wont be here till Wed., but I would like to go ahead and start the MDF rings. I have looked online and cannot find the measurments I need. All I have found is the hole cutout diameter is 11.25". Does anyone have a Von Gogh they can measure for me or know where I can find this info.

Thanks

Replies:

Posted By: boulderguy
Date Posted: October 03, 2005 at 2:53 PM

Not sure what other measurement you need - OD? I'd leave an inch all the way around, you should be fine. Then add for trim ring.

Posted By: ice8168
Date Posted: October 03, 2005 at 3:20 PM

Yes i need the OD

Posted By: ice8168
Date Posted: October 03, 2005 at 9:21 PM

Nobody has the OD for these subs??? I wouls also like to verify that 11.25 is the correct hole diameter. Anyone?

Posted By: boulderguy
Date Posted: October 03, 2005 at 9:32 PM

I think you should just wait for the subs...

Posted By: ice8168
Date Posted: October 03, 2005 at 11:20 PM

I thing thats what I an going to have to do.

Print Page | Close Window