2006 Chrysler 300 Stereo Install
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63839
Printed Date: May 08, 2024 at 11:07 PM
Topic: 2006 Chrysler 300 Stereo Install
Posted By: eviloutlaw
Subject: 2006 Chrysler 300 Stereo Install
Date Posted: October 05, 2005 at 9:55 AM
Hello, i have been looking around for a bit and cant find what im looking for. Im hoping someone can help me, i have a 2006 chrysler 300 base edition and im installing a pioneer 5700 in dash TV. I installed the harness and kit, the problem i am having is with the signal wire. I would like to know what is the best way to get a signal wire to the pioneer. It does not power one because the signal wire is not on the harness side of the car
Any help will be greatfull
Thank you
Replies:
Posted By: eviloutlaw
Date Posted: October 05, 2005 at 10:15 AM
I need the wiring diagram for the stereo on a 2006, i cant get a signal wire to the stereo so it does not turn on. Please help my stereo dont work
Posted By: blazeronspokes
Date Posted: October 05, 2005 at 10:35 AM
are you talking about the acc. turn on wire? if so , the best way to get it is to go to the fuse box in the trunk. i've done a few of these, the charger, and the magnum and had to run an acc. wire for all of them.
Posted By: eviloutlaw
Date Posted: October 05, 2005 at 10:40 AM
Thank you very much.
|