frequency questions
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63913
Printed Date: May 06, 2024 at 7:00 PM
Topic: frequency questions
Posted By: rustyspring03
Subject: frequency questions
Date Posted: October 06, 2005 at 10:34 AM
Alright I have a alpine 4channel pushing my interiors (fronts are 3way 4x6s doors are 4way 6.5s) would running 100 to the doors and 150-175 to the dash be a resonable sound? I am in the proccess of gettin a sub in but I just want to know if this would still sound clean. I thought it wouldnt be a problem... a buddy of mine who does installs recommended stayin at like 200 ... i'm currently runnin 150 to the doors and 200 to the dash) oh they are running about 50rms
any help would be appreciated
-------------
Rusty Spring
98 s10 reg cab
Type R 12 Inverted between seats
Type R 6.5 for doors
Type S 5.25 on the dash
Alpine MRD-M605 mono
Alpine MRV-F345 4ch
Replies:
Posted By: raydawg357
Date Posted: October 06, 2005 at 10:49 AM
The 4X6 won't handle that kind of power.
-------------
Do it right the first time
Posted By: rustyspring03
Date Posted: October 07, 2005 at 2:53 PM
question was about frequency are you sayin they wont handle the frequency or the power... cuz 50w rms is a no prob for them
-------------
Rusty Spring
98 s10 reg cab
Type R 12 Inverted between seats
Type R 6.5 for doors
Type S 5.25 on the dash
Alpine MRD-M605 mono
Alpine MRV-F345 4ch
Posted By: dwarren
Date Posted: October 07, 2005 at 3:50 PM
Your best is to try different frequencies. There is no absolute in setting x-over frequencies. Try different frequencies for front and rear too. You will have the best luck with your sub installed that way you can blend it better based on the subs x-over point as well.
-------------
|