Amp/Sub Set-Up

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64254
Printed Date: May 09, 2025 at 11:36 AM

Topic: Amp/Sub Set-Up

Posted By: ut_baseball_30
Subject: Amp/Sub Set-Up
Date Posted: October 12, 2005 at 6:23 PM

I have a Power Acoustik LT1920 two channel amp. It's 2-ohm stereo/4-ohm mono stable, RMS Power @ 4 Ohms: 370W x 2. I've also got 2 Audiobahn 10 inch Flame Excursion subwoofers. They are both 4 ohm. I need help on how to wire all this together.

Would this be a great way to get the most from my amp?

posted_image

Please help!!

-------------
posted_image

Replies:

Posted By: DYohn
Date Posted: October 12, 2005 at 7:38 PM

No. If your subwoofers are SVC woofers, you either need to connect one woofer to each amplifier channel, or wire the woofers in series to the bridged amplifier, not in parallel.

-------------
Support the12volt.com

Posted By: arrow12
Date Posted: October 12, 2005 at 9:25 PM

put one woofer to each channel.

-------------
That's my opinion. Take it, leave it, or correct me.

Posted By: ut_baseball_30
Date Posted: October 12, 2005 at 9:49 PM

So what if I got two 2 ohm subs, how exactly would I set this up? Parallel, series, or one to each channel? I want to be able to get every watt out of this amp, after all I paid for the amp and I want all the power I can get.

-------------
posted_image

Posted By: ut_baseball_30
Date Posted: October 28, 2005 at 7:36 AM

Posted By: geepherder
Date Posted: October 28, 2005 at 8:07 AM

Just as Dyohn and arrow 12 mentioned. Either way would give you the most power that amp can safely deliver.

-------------
My ex once told me I have a perfect face for radio.

Print Page | Close Window