Print Page | Close Window

Removing 10W7 From Prowedge Box

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64467
Printed Date: May 18, 2024 at 7:29 AM


Topic: Removing 10W7 From Prowedge Box

Posted By: surel0ser
Subject: Removing 10W7 From Prowedge Box
Date Posted: October 16, 2005 at 2:47 AM

Recently had a custom fiberglass enclosure made and for the life of me I cannot figure out how to remove the sub from the box. Anyone done it before? Please help! Paid to much to risk damaging.

Thanks




Replies:

Posted By: surel0ser
Date Posted: October 16, 2005 at 3:08 AM
surel0ser wrote:

Recently had a custom fiberglass enclosure made and for the life of me I cannot figure out how to remove the sub from the box. Anyone done it before? Please help! Paid to much to risk damaging.

Thanks

Of course I mean Im trying to remove the 10W7 from the JL Audio Prowedge Enclosure




Posted By: Bigsingh
Date Posted: October 16, 2005 at 4:22 AM
ok i dont know the exact way of removing it but go onto the jl site and there is a picture slide of how to install it so just do the opposite. let me see if i can find the link.....found it https://mobile.jlaudio.com/pdfs/W7_MountingSystem.pdf

-------------
6* Rockford T2's
6* POWER AMPs
BLACK CORRADO
BAANNGGIINN



Posted By: surel0ser
Date Posted: October 16, 2005 at 2:45 PM

[QUOTE=Bigsingh]ok i dont know the exact way of removing it but go onto the jl site and there is a picture slide of how to install it so just do the opposite. let me see if i can find the link.....found it https://mobile.jlaudio.com/pdfs/W7_MountingSystem.pdf[/QUOTE]

Perfect, got that sucker out finally.

Thanks A Lot!




Posted By: Bigsingh
Date Posted: October 16, 2005 at 2:52 PM
posted_image

-------------
6* Rockford T2's
6* POWER AMPs
BLACK CORRADO
BAANNGGIINN


Print Page | Close Window